ASTM A490 Bolts
ASTM A490 Bolts, ASTM A490 Bolts manufacturers, ASTM A490 Bolts suppliers, ASTM A490 Bolts exporters, ASTM A490 Bolts importers, ASTM A490 Bolts stockists. ASTM A490 Bolts, ASTM A490 Bolts in mumbai, ASTM A490 Bolts manufacturers in mumbai, ASTM A490 Bolts suppliers in mumbai, ASTM A490 Bolts exporters in mumbai, ASTM A490 Bolts importers in mumbai, ASTM A490 Bolts stockists in Mumbai. ASTM A490 Bolts, ASTM A490 Bolts in india, ASTM A490 Bolts manufacturers in India, ASTM A490 Bolts suppliers in India, ASTM A490 Bolts exporters in India, ASTM A490 Bolts importers in India, ASTM A490 Bolts stockists in India.
ASTM A490 Bolts particular secured extinguished and tempered, compound steel, overwhelming hex basic jolts from 1/2″ breadth through 1-1/2″ measurement with a base 150 ksi ductile. These jolts are expected for use in auxiliary associations and in this manner have shorter string lengths than standard hex jolts.
A490 screws are comparable in application and measurements to A325 overwhelming hex auxiliary screws however are produced using a combination steel as opposed to a medium carbon steel, bringing about a higher quality latch. The A490 particular is relevant to substantial hex auxiliary jolts as it were.
ASTM A490 Bolts jolts will not be covered by hot-plunge stirring, mechanical testimony, or electroplating with zinc because of the potential danger of hydrogen embrittlement. ASTM has endorsed covering A490 jolts with Zinc/Aluminum Corrosion Protective Coatings per ASTM F1136 Grade 3, economically called Geomet. Extra testing as Magnetic Particle Inspection for Longitudinal Discontinuities and Transverse Cracks is a prerequisite of the A490 detail.
ASTM A490 Bolts Specification covers material for extinguished and tempered Alloy Steel Bolting material for auxiliary application.This Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength.ASTM A490 Bolts is appropriate to Heavy hex head Bolts only.A490 determined jolts Should not be covered by hot-plunge galvanizing,any mechanical testimony, or electroplating with zinc because of the potential danger of hydrogen embrittlement.
ASTM A490 Bolts are proposed for auxiliary applications which implies they are of a more grounded review as well as highlight shorter strung lengths of the dart to maintain a strategic distance from obstruction with the joint. There are presently two distinct kinds of evaluations for both Imperial and Metric ASTM A490 Bolts jolts which are Type 1 Type 2, and Type 3 as demonstrated by fluctuating evaluation ID markings on the jolt heads. Type 2 was pulled back from the detail in 2002.
Useful Information of ASTM A490 Bolts
| Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
| Standard: | DIN 933, DIN 931, ANSI, JIS standards |
| In Form of: | Hex |
| Square | |
| Round | |
| Threading as per Gauge Etc. | |
| Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
| Packing: | IN BULK :canton/pallet, Small Boxs/carton/ pallet, or customer request |
| Test Certificate: | Manufacturer Test Certificate as per EN 10204 / 3.1 |
| Property Class: | For Bolts & Screws: A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H |
| For Nuts: A2-70, A2-80, A4-70, A4-80, F594C, F594D, F594G, F594H, A2-035, A4-040 | |
| For SHCS: F837B, F837C, F837E, F837 | |
| For Threaded Rods: A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H, B8, B8M CL1 & CL2 | |
| Finish: | Passivated |
| Origin and service-region: | European |
| Origin of 304 Stainless Steel Nuts are Western European. However projects with eastern origin are possible on request. | |
| Stainless Steel Grades: | AISI 304, AISI 304L, AISI 316, AISI 316L, AISI 309, AISI 310, AISI 317L, AISI 321, AISI 347, AISI 409, AISI 410, AISI 420, AISI 430, AISI 446, AISI 202 Etc. |
| Surface Coating: | Hot Dipped Galvanizing Fasteners |
| Phosphate Fasteners | |
| Teflon Fasteners | |
| Ptfe Coated Fasteners | |
| Xylon Fasteners | |
| Zinc Fasteners | |
| Cadmium Fasteners |
Available standards Stainless Steel 490 Bolts
| Material | Size | Length | Specification | Manufacturer |
| Stainless Steel 490 Fasteners | M 02 to M 160 | 3 mm | DIN | GKW |
| to | ISO | Unbrako | ||
| 200 mm | JIS | Kundan | ||
| GB | APL | |||
| IS | Sundaram Precision | |||
| BS | Infasco | |||
| ASTM | EBY Fastener Etc. |
A490 Types
| TYPE 1 | Medium carbon and alloy steel. |
|---|---|
| TYPE 2 | Withdrawn in 2002. |
| TYPE 3 | Weathering steel. |
| M | Metric A490. |
Connection Types
| SC | Slip critical connection. |
|---|---|
| N | Bearing type connection with threads included in the shear plane. |
| X | Bearing type connection with threads excluded from the shear plane. |
Chemical Composition
| Element | Type 1 % | Type 3 % |
|---|---|---|
| Carbon | 0.20 - 0.53 (3/4" and smaller) | 0.30 - 0.48 (sizes through 1-3/8") |
| 0.30 - 0.53 (larger than 3/4") | 0.35 - 0.53 (for 1-1/2") | |
| Manganese, min | 0.400 | -- |
| Phosphorus, max | 0.035 | 0.040 |
| Sulfur, max | 0.040 | 0.040 |
| Copper | 0.20 - 0.60 | -- |
| Chromium, min | 0.45 | -- |
| Nickel, min | 0.20 | -- |
| Molybdenum, min | 0.15 | -- |
Mechanical Properties
| Nominal Diameter, inch | Tensile Strength, min, ksi | Yield Strength, min, ksi | Elongation in 4D, min, % | Reduction in Area, min, % |
|---|---|---|---|---|
| 1/2" to 1-1/2", Inclusive | 150 - 173 | 130 | 14 | 40 |
Hardness Requirements
| Bolt Size, mm | Bolt Length*, mm | Brinell | Rockwell C | ||
|---|---|---|---|---|---|
| min | max | min | max | ||
| 1/2" to 1", inclusive | Less than 2D* | 311 | 352 | 33 | 39 |
| 1/2" to 1", inclusive | 2D and over | -- | 352 | -- | 39 |
| 1-1/8" to 1-1/2", inclusive | Less than 3D | 311 | 352 | 33 | 39 |
| 1-1/8" to 1-1/2", inclusive | 3D and over | -- | 352 | -- | 39 |
COATINGS
